Metadata Sample for 2011 Rattlesnake
Metadata extracted from 2011 Rattlesnake bare earth raster grid be_46119c41
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator: Watershed Sciences, Inc.
- Originator: Puget Sound LiDAR Consortium
- Publication_Date: 2011
- Title: be_46119c41
- Geospatial_Data_Presentation_Form: raster
digital data
- Online_Linkage:
- \\lidar\data\Drive4\pslc2011\Rattlesnake\dem\bare_earth\be_46119c41
- Description:
-
- Abstract:
- This dataset encompasses portions of Benton County,
Washington.
The bare earth digital elevation models (DEM) represent the earth's
surface with all vegetation and human-made structures removed. The bare
earth DEMs were derived from LiDAR data using TIN processing of the
ground point returns. The DEM grid cell size is 3 feet. The elevation
units are in US feet. Some elevation values have been interpolated
across areas in the ground model where there is no elevation data (e.g.
over water, over dense vegetation).
Watershed Sciences, Inc. collected the LiDAR and created this data set
for the Puget Sound LiDAR Consortium (PSLC).
- Purpose: Provide high resolution terrain
elevation data.
- Supplemental_Information:
- This data is assembled by 3.75 minute quadrangles (1/4 of
a USGS 7.5 minute quad) and delivered in Washington State Plane South
Horizontal: NAD83 (1991 HARN)
Vertical: NAVD88 Geoid 03
- Time_Period_of_Content:
-
- Time_Period_Information:
-
- Range_of_Dates/Times:
-
- Beginning_Date: 11/06/2010
- Ending_Date: 11/13/2010
- Currentness_Reference: ground condition
- Status:
-
- Progress: Complete
- Maintenance_and_Update_Frequency: None planned
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -119.500826
- East_Bounding_Coordinate: -119.437253
- North_Bounding_Coordinate: 46.375565
- South_Bounding_Coordinate: 46.328841
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus:
- REQUIRED: Reference to a formally registered
thesaurus or a similar authoritative source of theme keywords.
- Theme_Keyword: LiDAR
- Theme_Keyword: Light Detection and Ranging
- Theme_Keyword: DEM
- Theme_Keyword: digital terrain model
- Theme_Keyword: elevation data
- Theme_Keyword: topography
- Theme_Keyword: bare earth
- Theme_Keyword: high-resolution
- Theme_Keyword: bare ground
- Theme_Keyword: DTM
- Theme_Keyword: Puget Sound LiDAR Consortium
- Place:
-
- Place_Keyword: Pacific Northwest
- Place_Keyword: Washington
- Place_Keyword: Benton County
- Place_Keyword: UTM 10N
- Place_Keyword: Rattlesnake Mountain
- Access_Constraints: None.
- Use_Constraints:
- In some areas of heavy vegetation or forest cover, there may
be relatively few ground points in the LiDAR data. TINing the points
produces large triangles and thus elevations may be less accurate
within such areas.
Elevation values for open water surfaces are not valid because few
LiDAR points are returned from water surfaces. Triangles were created
across water surfaces by interpolating from the nearest land points.
- Point_of_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: Puget Sound LiDAR
Consortium
- Contact_Person: Diana Martinez
- Contact_Address:
-
- Address_Type: mailing address
- Address: 1011 Western Ave.
- Address: Suite 500
- City: Seattle
- State_or_Province: WA
- Postal_Code: 98104
- Country: USA
- Contact_Electronic_Mail_Address:
dmartinez@psrc.org
- Native_Data_Set_Environment:
- Microsoft Windows Vista Version 6.1 (Build 7600) ; ESRI
ArcCatalog 9.3.1.4000
- Data_Quality_Information:
-
- Logical_Consistency_Report:
- LiDAR flight lines have been examined to ensure that there
was at least 60% sidelap, there are no gaps between flightlines, and
overlapping flightlines have consistent elevation values.
Shaded relief images have been visually inspected for data errors such
as pits, border artifacts, gaps, and shifting. The data was examined at
a 1:2000 scale.
- Completeness_Report:
- LiDAR data has been collected and processed for all areas
within the project study area.
- Positional_Accuracy:
-
- Horizontal_Positional_Accuracy:
-
- Quantitative_Horizontal_Positional_Accuracy_Assessment:
-
- Horizontal_Positional_Accuracy_Explanation:
See LiDAR data report.
- Vertical_Positional_Accuracy:
-
- Quantitative_Vertical_Positional_Accuracy_Assessment:
-
- Vertical_Positional_Accuracy_Value: RMSE
= .040 meters
- Vertical_Positional_Accuracy_Explanation:
- The Root Mean Square Error (RMSE) of the data set
is .040 meters. Accuracy was assessed using 2064 ground survey (real
time kinematic) points. Please see LiDAR data report for a discussion
of statistics related to these datasets.
- Lineage:
-
- Process_Step:
-
- Process_Description:
- Acquisition.
The LiDAR data was collected from November 6th to 13th, 2010. The
survey used a Leica ALS50 Phase II system mounted in a Cessna Caravan
208. Near nadir scan angles were used to increase penetration of
vegetation to ground surfaces. Ground level GPS and aircraft IMU were
collected during the flight.
- Process_Step:
-
- Process_Description:
- Processing.
1. Flight lines and data were reviewed to ensure complete coverage of
the study area and positional accuracy of the laser points.
2. Laser point return coordinates were computed using ALS Post
Processor software, IPAS Pro GPS/INS software, and Waypoint GPS, based
on independent data from the LiDAR system, IMU, and aircraft.
3. The raw LiDAR file was assembled into flight lines per return with
each point having an associated x, y, and z coordinate.
4. Visual inspection of swath to swath laser point consistencies within
the study area were used to perform manual refinements of system
alignment.
5. Custom algorithms were designed to evaluate points between adjacent
flight lines. Automated system alignment was computed based upon
randomly selected swath to swath accuracy measurements that consider
elevation, slope, and intensities. Specifically, refinement in the
combination of system pitch, roll and yaw offset parameters optimize
internal consistency.
6. Noise (e.g., pits and birds) was filtered using ALS postprocessing
software, based on known elevation ranges and included the removal of
any cycle slips.
7. Using TerraScan and Microstation, ground classifications utilized
custom settings appropriate to the study area.
8. The corrected and filtered return points were compared to the RTK
ground survey points collected to verify the vertical and horizontal
accuracies.
9. Points were output as laser points, TINed and GRIDed surfaces.
- Process_Step:
-
- Process_Description: Metadata imported.
- Source_Used_Citation_Abbreviation:
F:\Rattlesnake\metadata\BE.img.xml
- Process_Date: 20110315
- Process_Time: 19374600
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Raster
- Raster_Object_Information:
-
- Raster_Object_Type: Grid Cell
- Row_Count: 5611
- Column_Count: 5278
- Vertical_Count: 1
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Planar:
-
- Map_Projection:
-
- Map_Projection_Name: Lambert Conformal
Conic
- Lambert_Conformal_Conic:
-
- Standard_Parallel: 45.833333
- Standard_Parallel: 47.333333
- Longitude_of_Central_Meridian:
-120.500000
- Latitude_of_Projection_Origin:
45.333333
- False_Easting: 1640416.666667
- False_Northing: 0.000000
- Planar_Coordinate_Information:
-
- Planar_Coordinate_Encoding_Method: row
and column
- Coordinate_Representation:
-
- Abscissa_Resolution: 3.000000
- Ordinate_Resolution: 3.000000
- Planar_Distance_Units: survey feet
- Geodetic_Model:
-
- Horizontal_Datum_Name:
D_North_American_1983_HARN
- Ellipsoid_Name: Geodetic Reference System 80
- Semi-major_Axis: 6378137.000000
- Denominator_of_Flattening_Ratio: 298.257222
- Vertical_Coordinate_System_Definition:
-
- Altitude_System_Definition:
-
- Altitude_Datum_Name: North American Vertical
Datum of 1988
- Altitude_Distance_Units: US Feet
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
- Attribute:
-
- Attribute_Label: ObjectID
- Attribute_Definition: Internal feature
number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
- Sequential unique whole numbers that are
automatically generated.
- Attribute:
-
- Attribute_Label: Value
- Attribute:
-
- Attribute_Label: Count
- Distribution_Information:
-
- Distributor:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: Puget Sound LiDAR
Consortium
- Contact_Person: Diana Martinez
- Contact_Address:
-
- Address_Type: mailing address
- Address: 1011 Western Ave.
- Address: Suite 500
- City: Seattle
- State_or_Province: WA
- Postal_Code: 98104
- Country: USA
- Contact_Electronic_Mail_Address:
dmartinez@psrc.org
- Resource_Description: Downloadable Data
- Standard_Order_Process:
-
- Digital_Form:
-
- Digital_Transfer_Information:
-
- Transfer_Size: 120.732
- Metadata_Reference_Information:
-
- Metadata_Date: 20110614
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: Watershed
Sciences, Inc.
- Contact_Address:
-
- Address_Type: mailing address
- Address: 517 SW 2nd St.
- Address: Suite 400
- City: Corvallis
- State_or_Province: OR
- Postal_Code: 97333
- Country: USA
- Contact_Voice_Telephone: 541-752-1204
- Contact_Electronic_Mail_Address:
watershedsciences.com
- Metadata_Standard_Name: FGDC Content Standards for
Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
Generated by mp
version 2.9.6 on Tue Jun 14 10:54:45 2011